Infrared Night Vision System Rifle Scope Hunting Sight 850nm LED 4.3" IR Camera


Commissioning of the Machine:


1.Secure the display and IR light on the optical sight with the pipe clamp.

2.Loosen the plastic screws, and centrally fix the connecting tube in the rear of the eyepiece of the optical sight.

3.Turn on the machine and rotate the lens of the machine (inside the tube) to adjust the focus, and adjust the cross line of optical sight to be clear.

4.Adjust the position of the connecting tube, and tighten the screws till the cross line in the center of the display. And the commissioning of the machine is complete till now.

5.In the future application, if the image is blurred caused by the different distances of the objects, the image clarity shall be adjusted by side focus roller (and the parallax adjustment roller) attached with the optical sight. Do not move the machine lens, otherwise the cross line will be blurry


NOTE:

* This item does not include an internal battery.

* Do Not Shot Circuit

* Do Not Reverse Polarity Of The Battery

* Scope not included

* Product parameters

* type: Monocular

* type of infrared emitter: separate transmitter

* Size: 4.3 inch LED

* Infrared Night Vision System Rifle Scope Hunting Sight 850nm LED 4.3" IR Camera

* Power supply: 2Pcs 18650 battery(not included) + 1pc for Infrared Torch

* Suitable for sight lens diameter: 35-45mm


* Day and night

* Comes with a dedicated infrared flashlight. , please add additional IR lighting for a brighter night visibility, torch supplied is only an entry level



Package:

1 x 4.3 Inch Display

1 x Camera

1 x Camera Tube

1 x Lasers Flashlight

1 x Lamp Mounting Seat

1 x Monitor Fixture With Inner Diameter Of 30mm

1 x Monitor Fixture With Inner Diameter Of 25mm

1 x Camouflage tape



The adapter should be attached to the CCD lens with its own small screw, and you can use a round tape to protect the lens